Table of Contents
Advertisement
NOTE:
Dell provides the Dell Update Package (DUP) to update drivers on systems running Windows Server 2016 and
newer operating system. DUP is an executable application that updates drivers for specific devices. DUP supports
command line interface and silent execution. For more information, see https://www.dell.com/support.
Linux driver installation
The driver update disk (DUD) images are created only for those operating system releases in which the native (in-box) driver
is insufficient for installation. In the event that an operating system is being installed with a corresponding DUD image, see,
Installing or updating the RPM driver package with KMOD
skip to the topic
Installing or Updating the RPM Driver Package With KMP
NOTE:
The driver update disk (DUD) images are created only for those operating system releases in which the native
(in-box) driver is insufficient for installation. In the event that an operating system is being installed with a corresponding
DUD image, follow the instructions below.
NOTE:
To view the complete list of boot loader options, see the installation guide of your operating system.
NOTE:
If using out-of-box drivers with RHEL 7 and higher, a tainted kernel message will be displayed in the log. RedHat
does not provide a mechanism to sign external drivers for RHEL.
Install or update a RPM driver package using the KMOD support
Prerequisites
NOTE:
This procedure is applicable for Red Hat Enterprise Linux 7.x and higher.
About this task
Perform the following steps to install the RPM package with KMOD support:
Steps
1. Uncompress the gzipped tarball driver release package.
2. Install the driver package using the command: rpm –ihv kmodmegaraid_ sas-<version>.rpm.
NOTE:
Use rpm -Uvh <package name> when upgrading an existing package.
3. If the previous device driver is in use, you must reboot the system for the updated driver to take effect.
4. Verify the loaded driver version by running the following command: modinfo megaraid_sas.
Install or update a RPM driver package using the KMP support
Prerequisites
NOTE:
This procedure is applicable for SUSE Enterprise Linux 15.x.
About this task
Perform the following steps to install the RPM package with KMP support:
Steps
1. Uncompress the gzipped tarball driver release package.
2. Install the driver package using the commands:
● Use rpm -Uvh kmod-mpt3sasxxxxxx.rpm to update an existing package.
● Use rpm -ivh kmod-mpt3sasxxxxx.rpm to install the package.
3. If the previous device driver is in use, you must reboot the system for the updated driver to take effect.
36
Driver support for Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, and Dell
HBA350i Adapter
support. If not, proceed with using the native device driver and then
Support.
Hide quick links:
Advertisement
Table of Contents
