Replacing The Mower Belt - Kubota ZD1211-AU Operator's Manual

MAINTENANCE
• The blade bolts have right hand threads.
Turn them counterclockwise to loosen.
• To prolong the service life of the blades,
reposition them as shown in the following
figure periodically.
(1) LH blade
(2) Center blade
(3) RH blade

4. Replacing the mower belt

WARNING
To avoid serious injury or death:
• Be sure to reinstall the removed cover after
replacing the belt.
1. Remove the mower deck from the machine.
(See DISMOUNTING THE MOWER DECK on page
25.)
2. Remove the left and right hand shield from the
mower deck.
3. Clean around the gear box.
4. Remove the belt from the tension pulley.
5. Remove the right hand bracket which mounts the
gear box to the mower deck and slip the belt over
the top of the gear box.
6. To install a new belt, reverse the previous
procedure.
NOTE :
• Tighten bracket bolts securely 77.5 to
90.2 N⋅m (8.0 to 9.2 kgf⋅m, 57.1 to
66.5 lbf⋅ft).
86
(1) Tension pulley
(2) Bracket (RH)
(3) Belt
SERVICE AS REQUIRED
ZD1211,ZD1221