Replacing Mower Belt - Kubota ZD1011 Operator's Manual

68 MAINTENANCE
[RCK48P, RCK54P]
(1) Spindle holder
(2) Spindle guard
(3) Blade
(4) 2-Cup washer
(5) Lock washer
(6) Bolt
A Tighten the three blade bolts to 102.9 to 117.6 N-m
(10.5 to 12 kgf-m, 75.9 to 87 lbf-ft) of torque.
A The blade bolts have Right hand threads. Turn them
counterclockwise to loosen.
A To prolong the service life of the blades, reposition
them as shown in the figure below periodically.
(1) LH blade
(2) Center blade
(3) RH blade
BReplacing Mower Belt
1. Remove the mower deck from the machine according
to the procedure "DISMOUNTING THE MOWER
DECK".
2. Remove the left and right hand shield from the mower
deck.
3. Clean around the gear box.
4. Remove the belt from the tension pulley.
5. Remove the right hand bracket which mounts the gear
box to the mower deck and slip the belt over the top of
the gear box.
6. To install a new belt, reverse the above procedure.
A Tighten bracket bolts securely 77.5 to 90.2 N-m (8.0 to
9.2 kgf-m, 57.1 to 66.5 lbf-ft).
(1) Tension pulley
(2) Bracket (RH)
(3) Belt