User Configurable Options & Features; Advanced Features - Behringer NEUTRON Quick Start Manual

64
NEUTRON
User Configurable Options & Features
Step 4: User Configurable
(EN)
Options & Features
Assignable Output
It is possible to select the source of the
"ASSIGN" output jack.
To change the source press & hold the
"OSC SYNC" button until both the "RANGE"
buttons are flashing. The currently
selected assignable output is indicated
by the flashing LFO shape LED - the
available options are (clockwise from the
sine shape):
1. OSC 1 CV
2. OSC 2 CV
3. "Note On" velocity
4. Modwheel
5. Aftertouch
Use the two range buttons to change
the selected output. When you're done
press & hold the "OSC SYNC" button until
the "RANGE" buttons stop flashing. The
currently selected assignable output
value will be stored & will persist across
power cycles.
OSC & LFO SHAPE MODE BLEND OR
SWITCHED
It is possible to either blend or switch the
OSC & LFO shape. This feature is incredibly
powerful unique sound creation tool.
For OSC1 press & hold "OSC1 RANGE"
button (this will enter the tuning feature).
The "PARAPHONIC" button will flash if
shape mixing is disabled, or it will throb
if shape mixing is enabled. Press the
"PARAPHONIC" button to toggle the shape
mix state. Press & hold the "OSC1 RANGE"
to leave this mode.
Similarly, for OSC2 shape mixing press &
hold "OSC2 RANGE"; for LFO shape mixing
press & hold "LFO KEY SYNC"
TUNING
The Neutron will self-calibrate at start-up.
An additional "tune" feature is designed
to allow the user to manually tune the
oscillators to the last played midi note.
To tune OSC1 or OSC2 press & hold the
appropriate "RANGE" button until the
octave LED starts to flash. Play a MIDI note.
The LFO shape LEDS will display the tuning
- turn the TUNE control until only the
descending saw LED is lit. To exit tuning
mode press & hold the RANGE button until
the octave LED stops flashing.
Note tuning is not available when in
+/-10 Octave mode. (3 octave LEDs on).

ADVANCED FEATURES

Please refer to the Neutron user manual
available at musictri.be for more
detailed information.