User Confi Gurable Options & Features - Behringer NEUTRON Quick Start Manuals

40 NEUTRON
User Confi gurable Options & Features
Step 4: User Confi gurable
(EN)
Options & Features
Assignable Output TUNING
It is possible to select the source of the The Neutron will self-calibrate at start-up.
"ASSIGN" output jack. An additional "tune" feature is designed
to allow the user to manually tune the
To change the source press & hold the
oscillators to the last played midi note.
"OSC SYNC" button until both the "RANGE"
buttons are fl ashing. The currently To tune OSC1 or OSC2 press & hold the
selected assignable output is indicated appropriate "RANGE" button until the
by the fl ashing LFO shape LED - the octave LED starts to fl ash. Play a MIDI note.
available options are (clockwise from the The LFO shape LEDS will display the tuning
sine shape): - turn the TUNE control until only the
descending saw LED is lit. To exit tuning
1. OSC 1 CV
mode press & hold the RANGE button until
2. OSC 2 CV the octave LED stops fl ashing.
3. "Note On" velocity Note tuning is not available when in
+/-10 Octave mode. (3 octave LEDs on).
4. Modwheel
5. Aftertouch
ADVANCED FEATURES
Use the two range buttons to change
Please refer to the Neutron user manual
the selected output. When you're done
available at musictri.be for more
press & hold the "OSC SYNC" button until
detailed information.
the "RANGE" buttons stop fl ashing. The
currently selected assignable output
value will be stored & will persist across
power cycles.
OSC & LFO SHAPE MODE BLEND OR
SWITCHED
It is possible to either blend or switch the
OSC & LFO shape. This feature is incredibly
powerful unique sound creation tool.
For OSC1 press & hold "OSC1 RANGE"
button (this will enter the tuning feature).
The "PARAPHONIC" button will fl ash if
shape mixing is disabled, or it will throb
if shape mixing is enabled. Press the
"PARAPHONIC" button to toggle the shape
mix state. Press & hold the "OSC1 RANGE"
to leave this mode.
Similarly, for OSC2 shape mixing press &
hold "OSC2 RANGE"; for LFO shape mixing
press & hold "LFO KEY SYNC"
Advanced Features Access Action
Change Assignable Hold OSC SYNC Use RANGE
Output (ASSIGN) buttons to change
Output function
Envelope Hold OSC SYNC the KEY TRK
Retriggering button toggles the
retriggering mode
OSC 1 Shape Hold OSC1 RANGE PARAPHONIC will
(Blend or Switched) either throb or fl ash.
Push to toggle mode
OSC 2 Shape Hold OSC2 RANGE PARAPHONIC will
(Blend or Switched) either throb or fl ash.
Push to toggle mode
LFO Hold LFO KEY SYNC PARAPHONIC will
(Blend or Switched) either throb or fl ash.
Push to toggle mode
OSC 1 Tuning Hold RANGE 1 LFO shape LEDs
shows tuning with
respect to the last
played MIDI note
OSC 2 Tuning Hold RANGE 2 LFO shape LEDs
shows tuning with
respect to the last
played MIDI note
Poly Chain mode Hold PARAPHONIC The LED will pulse
slowly in mono
mode - quickly in
duo mode
Quick Start Guide 41
Result Exit
LFO shape displays Hold OSC SYNC
selected option.
When the KEY Hold OSC SYNC
TRK LED is on -
retriggering is
enabled
OSC 1 Shape Hold OSC 1 RANGE
mode will toggle.
Blend or switch
OSC 2 Shape Hold OSC 2 RANGE
mode will toggle.
Blend or switch
LFO Shape mode Hold LFO KEY SYNC
will toggle.
Blend or switch
Top center LFO Hold RANGE 1
Shape LED indicates
that the oscillator is
in tune
Top center LFO Hold RANGE 2
Shape LED indicates
that the oscillator is
in tune
Poly-Chain mode Hold PARAPHONIC
toggled on/off