Recording; Recording Voice; Line-In Recording - IRiver H10 Instruction Manual

Basic operation

Recording

Recording Voice

1 Select the <RECORDING> mode using the
[ / ] scroll from the main menu.
2 Press the [ ] button to display the Recording
Source screen.
44
3 Move to <Voice> using the [
confirm it by pressing the [
4 Press the [ ] button to start recording.
5 Press the [ ] button to stop recording.
Note
Volume control is not available while recording.
Keep player at least 12 inches from the recording source
to avoid distortion.
You can change the voice setting in the
<Voice Setting>menu. (Refer to page 62.)
/ ] scroll and
] button.
Basic operation

Recording

Line-in recording is only available using the optional cradle.
Line–In recording
1 After connecting the player and cradle, connect the cradle's Line-In jack to
the Line-Out (or earphone) jack of an external device using the Line-In/Out
connection cable.
<External device>
2 In the Recording Source screen, move to <Line–In>
using the [ / ] scroll and confirm it by pressing
the [ ] button.
<Side of the cradle>
CHG
CHG
MAIN MAIN
SUB SUB
45