Advertisement
301023
208042*
ON
OFF
START
701026
208041
1) Remove the top cowling.
2) Remove the flywheel cover.
3) Prepare the engine for starting. See
"STARTING ENGINE" for procedures.
Be sure the engine is in Neutral and
that the lanyard is attached to the
engine stop switch.
4) Turn the main switch to START and
back to OFF several times to inject
some fuel into the combustion cham-
bers, then put the switch in the ON
position.
NOTE:
If the engine will not start with this proce-
dure, refer to "ENGINE FAILS TO OPER-
ATE".
5) To start the engine with emergency
starter rope, insert the knotted end of
the rope into the notch in the flywheel
rotor and wind the rope several turns
clockwise. Then, give a strong pull
straight out to crank the engine.
Repeat if necessary.
5-7
GB
Advertisement
Chapters
