Chain Port; Port Type; Modem Initialization String; Initialize Modem - ADTRAN Atlas 550 User Manual

Chapter 6. System Control Terminal Menus
E
THERNET
S
PEED
C P
HAIN ORT
N
P
ORT AME
P T
ORT YPE
P S
ORT PEED
M
ODEM
I
NITIALIZATION
S
TRING
I
NITIALIZE
M
ODEM
F C
LOW ONTROL

SNMP

SNMP A
CCESS
6-10
Write security: 3; Read security:5
Defines the data rate on the Ethernet interface. Choose from 10 M
A 10/100. When the unit is set for A
UTO
detects the data rate of the LAN and set itself to that rate, either 10 M
.
100 M
BPS
Write security: 2; Read security: 5
Accepts input for configuring the Chain In port.
Write security: 2; Read security: 5
Defines the name of the chain port. Type in an alpha-numeric name up to 57
characters long. The name can include spaces and special characters.
Write security: 2; Read security: 5
Specifies whether you use D
Write security: 2; Read security: 5
Specifies the baud rate of the port. Select either 2400, 9600, 19200, or 38400.
If you are using D for P
IAL
matches the modem baud rate.
Write security: 2; Read security: 5
Specifies the initialization string for a modem. Refer to your modem docu-
mentation for acceptable initialization strings.
Write security: 4; Read security: 5
Sends the Modem Initialization string to the modem. When you select this
command, the following message displays: Please verify a modem is connected
to the chain port before continuing. Confirm (y/n). Ensure that a modem is con-
nected before selecting
Y
Write security: 2; Read security: 5
Sets the flow control for the Chain In port. You may configure the Chain In
port flow control for OFF or H/W (hardware).
Write security: 3; Read security: 5
Provides a way to configure SNMP access for the ATLAS 550. For detailed
information on SNMP, refer to SNMP Management on page 13-1. The follow-
ing options are available for review and editing:
Write security: 3; Read security: 5
Defines whether SNMP access to the ATLAS 550 is enabled or disabled.
Select the appropriate option.
ATLAS 550 User Manual
10/100 the ATLAS 550 auto
UTO
or D mode.
IRECT IAL
T , ensure that the P
ORT YPE
.
or
BPS
or
BPS
S setting
ORT PEED
61200305L1-1