Craft Port; 10/100Baset Connection; Table 3. Craft Pinout; Table 4. 10/100Baset Pinout - ADTRAN Total Access 600R System Manual

Section 2 Engineering Guidelines

Craft Port

The port connects to a computer or modem. The
CRAFT
functions:
• Accepts input from a PC or a modem for controlling the unit.
• Operates at 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 bps.
• Acts as input for either VT100 or PC control.
• Acts as an interface for flash memory software downloads using XMODEM.
Table 3 shows the
CRAFT
Connector type
PIN NAME
1 GND
2 RTS
3 RXDATA
4 DTR
5 TXDATA
6 CD
7 UNUSED
8 CTS

10/100BaseT Connection

The port (RJ-48C) provides a 10/100BaseT Ethernet LAN connection, which is used for IP
10/100BASET
Routing, TFTP, SNMP, and Telnet connections. Table 4 shows the
Connector type
PIN NAME
1 TX1
2 TX2
3 RX1
4, 5 UNUSED
6 RX2
7, 8 UNUSED
24
port pinout.
RJ-48C

Table 3. CRAFT Pinout

DESCRIPTION
Ground - connected to unit chassis
Request to send - flow control
Data received by the unit.
Data terminal ready
Data transmitted by the unit.
Carrier detect
—
Clear to send - flow control
RJ-48C

Table 4. 10/100BaseT Pinout

DESCRIPTION
Transmit Positive
Transmit Negative
Receive Positive
—
Receive Negative
—
© 2002 ADTRAN, Inc.
Total Access 600R System Manual
port input provides the following
CRAFT
10/100BASET
port pinout.
61200600L1-1A