Casio FA-B30 User Manual page 63

EZ-LABEL PRINTER tape printer
• Is label jammed?
Remove the tape cartridge or thermal roll paper, and then remove the jammed
label. See the Label Printer's user's guide for details.
• Is tape cutter worn?
Contact your CASIO nearest dealer to have
the cutter replaced.
• Is the No Cut option selected?
Select a different cutting option.
• Are you using a short tape length (30mm or
less with small margins, 37mm or less with
medium margins, or 47mm or less with large
margins)?
After printing is complete, use the cutter
button to cut the tape.
Important!
• Available cutting options depend on the
Label Printer model. See the Label Printer's
user's guide for details.
EZ-LABEL PRINTER tape printer
• Is tape cutter worn?
Contact your nearest CASIO dealer to have
the cutter replaced.
• Is the No Cut option selected as the Auto
Cut Style option?
Change the Auto Cut Style option setting to
Half Cut/Full Cut.
Important!
• Available cutting options depend on the
Label Printer model. See the Label Printer's
user's guide for details.
• Make sure you take up any slack in the ink
ribbon before loading the tape cartridge into
the Label Printer.
• Note that half cutting cannot be performed
when you are using reflective tape, magnetic
tape, or any other special tape.
The tape does not cut.
Half cutting is not performed.
63
Thermal roll paper printer
—
Thermal roll paper printer
—