Casio FA-B30 User Manual page 62

EZ-LABEL PRINTER tape printer
• Are you using a proper print density setting?
Change the print density setting. See "To configure Label Software properties"
on page 43.
• Is the tape cartridge or thermal roll paper loaded correctly?
Correctly load the tape cartridge or thermal roll paper. See the Label Printer's
user's guide for details.
• Is the printer head or rubber roller inside the printer dirty?
Clean the printer head and rubber roller. See the Label Printer's user's guide for
details.
Ink ribbon is coming out of the tape outlet together with the tape.
EZ-LABEL PRINTER tape printer
• Was the ink ribbon slack when you loaded
the tape cartridge?
Remove the tape cartridge and make sure
the ink ribbon is not broken. Correctly load
the tape cartridge. See the Label Printer's
user's guide for details.
Important!
• Make sure you take up any slack in the ink
ribbon before loading the tape cartridge into
the Label Printer.
• If the ink ribbon ever breaks, replace the tape
cartridge with a new one.
EZ-LABEL PRINTER tape printer
• Is the printer head overheated?
The printer head heats up during printing. If you print a large number of
consecutive labels or print labels that contain a large amount of black areas,
the printer head can overheat, which causes printing to stop automatically.
Simply leave the printer alone and the printing will resume when the print head
cools down.
Print quality is poor.
Printing stops part way through.
62
Thermal roll paper printer
Thermal roll paper printer
—
Thermal roll paper printer