Pairing Suunto Tank Pod - Suunto TANK POD User Manual

Suunto Tank POD
For EON Core and Steel
For D5

3.4. Pairing Suunto Tank POD

For EON Core and Steel
To pair a Suunto Tank POD:
1. After installing the Tank POD and opening the valve, wait for green LED on Tank POD to
flash.
2. If your dive computer has a blank screen, press any key to activate it.
3. Use proximity pairing: Hold your dive computer close to the Tank POD. Make sure you
follow the instructions in 3.3. Tank POD alignment.
4. After a few seconds, a menu pops up on the screen showing the Tank POD serial number,
battery status and the tank pressure. From the menu, select the correct gas for that Tank
POD.
10