Making Overall Settings For The Taiko-1; (Others); Returning To The Factory Settings; Factory Reset - Roland TAIKO-1 Owner's Manual

Making Overall Settings for the TAIKO-1 (Others)
Here's how to make settings that are common to the entire TAIKO-1,
such as specifying the output destination of the TAIKO-1, and making
footswitch assignments.
1. Press the "MENU"
(F2 button)
2. Use the [H] [I] buttons to select "Others," press the
"SELECT" .
(F2 button)
The following items are shown.
Item Explanation
OUTPUT jack settings
Output Settings
& "Reference Manual" (PDF)
Pedal jack and shortcut settings
You can assign functions such as kit switching
or set list switching to a footswitch (sold
separately: BOSS FS-5U, FS-6) that's connected
to the TAIKO-1, and assign functions such as
Control Settings
pitch, volume, or ji-uchi tempo to an expression
pedal (sold separately: EV-5).
You can also change the function (shortcut) of
the [
& "Reference Manual" (PDF)
MIDI settings
Global MIDI
& "Reference Manual" (PDF)
Editing the master equalizer settings
Master EQ
& "Reference Manual" (PDF)
Editing the master compressor settings
Master Comp
& "Reference Manual" (PDF)
Screen and Auto Off settings
You can adjust the brightness of the screen, and
make other system settings.
Parameter
[H] [I] button
LCD Contrast
LCD Backlight
LCD/Auto Off
Auto Off
Viewing Information About the Unit
Version Info
Shows information about the TAIKO-1 itself,
such as the program version.

Returning to the Factory Settings

& "Returning to the Factory Settings

Factory Reset

(Factory Reset)" (p. 13)
3. Use the [H] [I] buttons to select the item, and then
press "SELECT"
(F2 button)
4. Use the [H] [I] buttons to select a parameter, and
then use the [+] [–] buttons to change the setting.
5. Press the "BACK"
(F1 button)
the top screen.
.
] (tomoe) button.
Value/Explanation
[+] [-] button
1–16: Adjusts the contrast of
the display.
1–16: Adjusts the brightness
of the display.
OFF: The power does not turn
off automatically.
4 HOURS/10 MINUTES:
When four hours or ten
minutes have elapsed
without any pad being struck
or any operation being
performed, the unit will turn
off automatically.
.
several times to return to
Returning to the Factory Settings
Here's how the settings that you edited and saved on the TAIKO-1 can
be returned to their factory-set condition.
* When you execute this operation, all saved settings including the
sound parameters will be lost.
1. Press the "MENU"
(F2 button)
2. Use the [H] [I] buttons to select "Others," press the
"SELECT" .
(F2 button)
3. Use the [H] [I] buttons to select "Factory Reset,"
press the "SELECT"
(F2 button)
A confirmation message appears.
If you decide to cancel, press the "CANCEL" (F1 button).
4. To execute, press the [+] button.
(Factory Reset)
.
.
13