Page of 4
Download Bookmark Comment

Casio AQ164W-1AV Operation Manual

Casio aq164w-1av: user guide.
Hide thumbs
   
MO0804-EA
Operation Guide 4380 4396 5048
About This Manual
Module 4380
Module 4396
Module 5048
• The operational procedures for Modules 4380 , 4396 and 5048 are identical. All of
the illustrations in this manual show Module 4380.
• Button operations are indicated using the letters shown in the illustration.
• For the sake of simplicity, the sample displays in this manual do not show the analog
hands of the watch.
• Depending on the model of your watch, display text appears either as dark figures
on a light background, or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the "Reference" section.
General Guide
• Press C to change from mode to mode.
• In any mode (except when a setting screen is on the display), press B to illuminate
Countdown Timer
the face of the watch.
Stopwatch Mode
Recall Mode
Mode
Timekeeping Mode
Press C.
Hand Setting Mode
Dual Time Mode
Alarm Mode
Timekeeping
Daylight Saving Time (DST) Setting
Use the Timekeeping Mode to set and view the current
Day of week
time and date. This watch features separate digital and
Daylight Saving Time (summer time) advances the time setting by one hour from
Month – Day
analog timekeeping. The procedures for setting the digital
Standard Time. Remember that not all countries or even local areas use Daylight
time and analog time are different.
Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
Setting the Digital Time and Date
Use the Timekeeping Mode to set and view a digital
On/Off status
display of the current time and date. When setting the
digital time, you also can configure settings for the
summer time (Daylight Saving Time or DST).
Minutes
Hours
Seconds
On/Off status
PM indicator
DST indicator
On/Off status
DST indicator
DST indicator
To set the digital time and date
Module 4380
Module 4396
Module 5048
1. In the Timekeeping Mode, hold down A until the
1. In the Timekeeping Mode, hold down A until the seconds start to flash, which
seconds start to flash, which indicates the setting
screen.
indicates the setting screen.
2. Press C to move the flashing in the sequence shown
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (ON displayed) and Standard
below to select other settings.
Time (OF displayed).
4. Press A to exit the setting screen.
Hour
Seconds
DST
Minutes
• The DST indicator appears on the Timekeeping, Alarm, and Hand Setting Mode
Seconds
screens to indicate that Daylight Saving Time is turned on.
Day
Month
Year
Setting the Analog Time
Perform the procedure below when the time indicated by the analog hands does not
3. When the setting you want to change is flashing, use D and B to change it as
match the time of the digital display.
described below.
To adjust the analog time
Screen:
To do this:
Do this:
1. In the Timekeeping Mode, press C six times to enter
Press D.
Reset the seconds to 00
the Hand Setting Mode.
2. Hold down A until the current digital time starts to
Press D.
Toggle between Daylight Saving
flash, which indicates the setting screen.
Time (
) and Standard Time (
)
ON
OF
3. Use D to adjust the analog setting.
Use D (+) and B (–).
• Press D once to advance the hands 20 seconds.
Change the hour or minutes
• Hold down D to advance the hands at high speed.
Use D (+) and B (–).
Change the year
• To lock high speed hands movement, hold down D to start it and then press B
to lock. The hands will continue to advance for one 12-hour cycle or until you
Change the month or day
press any button to stop it.
• High-speed hand movement will stop automatically after the time advances 12
hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper) starts
4. Press A to exit the setting screen.
to sound.
• The day of the week is displayed automatically in accordance with the date (year,
4. Press A to exit the setting screen.
month, and day) settings.
• The minute hand will be adjusted slightly to match the seconds when you exit the
• Any time the seconds setting is changed, the analog hands are adjusted accordingly.
setting screen.
• See "Daylight Saving Time (DST) Setting" below for details about the DST setting.
• To return to the Timekeeping Mode, press C.
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-
hour timekeeping.
Stopwatch
• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
The stopwatch lets you measure elapsed time, lap times,
times in the range of noon to 11:59 p.m. and the A (AM) indicator appears to the left
Remaining
split times, and two finishes. Lap times and split times can
of the hour digits for times in the range of midnight to 11:59 a.m.
free records
be stored in memory.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
• The display range of the stopwatch is 99 hours,
any indicator.
59 minutes, 59 seconds.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
• All of the operations in this section are performed in the
applied in all other modes.
Stopwatch Mode, which you enter by pressing C.
• The A and P indicators are not displayed with the Timekeeping Mode time on the
Countdown Timer Mode and Dual Time Mode screens.
Note
• "Lap time" is the time spent to cover a specific segment
of a race, such as one lap around a track. "Split time" is
Hours
1/100 second
the time spent from the beginning of a race up to a
Minutes
Seconds
certain point.
1

   Related Manuals for Casio AQ164W-1AV

   Summary of Contents for Casio AQ164W-1AV

  • Page 1

    • For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch. • Depending on the model of your watch, display text appears either as dark figures on a light background, or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background.

  • Page 2

    • If you are adding records to a log when there are multiple logs in memory and watch memory becomes full, adding another record causes the oldest log in memory and all of its records to be deleted automatically to make room for new records.

  • Page 3

    You also can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour. • There are three alarm screens numbered 1 through 3. The hourly time signal screen is indicated by :00.

  • Page 4

    (mute indicator not displayed) and off (mute indicator displayed). • Holding down C to turn the button operation tone on or off also causes the watch’s current mode to change. • The mute indicator is displayed in all modes when the button operation tone is turned off.

This manual also for:

Aq164wd-7a, 4380, 4396, 5048, 2789

Comments to this Manuals

Symbols: 0
Latest comments: