Playing Back From Song Memory; Real-Time Recording To Track 2 - Casio CTK-591 User Manual

Song Memory Function
MODE

Playing Back from Song Memory

Use the following procedure to play back song memory
contents.
To play back from song memory
1
Use the SONG MEMORY button to enter playback
standby, and then use [+] and [–] to select 0 or 1 as
the song number.
P l a
• The above song number screen remains on the display
for about five seconds. If it disappears before you have
a chance to select a song number, use the SONG
MEMORY button to display it again.
2
Press the START/STOP button to start playback of
the song you selected.
• During memory playback you can use the TRACK 1
and TRACK 2 buttons to turn playback of either track
on or off.
P l a
• You can use the TEMPO buttons to adjust the tempo.
3
Press the START/STOP button again to stop
playback.
E-44
CTK591_e_41-45.p65
SONG MEMORY
START/STOP
N o .
y
N o .
y
Indicators appear
44
TRACK 1
TRACK 2
TEMPO
NOTE
• During memory playback, the entire keyboard functions
as a melody keyboard, regardless of the MODE switch
setting.
• You can play along on the keyboard while playing back
from song memory. You can also use layer (page E-46)
and split (page E-46) to play along with more than one
tone.
• You cannot use pause, fast forward or fast reverse
operations with song memory playback.

Real-time Recording to Track 2

After you record Track 1, you can use real-time recording to
add a melody in Track 2.
To record to Track 2 while playing
back Track 1
1
Use the SONG MEMORY button to enter record
standby, and then use [+] and [–] to select 0 or 1 as
the song number.
R e c . N . o
• The track is not yet selected at this point.
2
Press the TRACK 2 button to select Track 2.
R e c . N o .
Flash
03.10.7, 4:27 PM
[+] / [–]
Flash
704A-E-046A