Additional Digitizing Information - Brother PE-600II User Manual

APPENDIX —————————————————————————————————————————————————————
6 Align the holes on the embroidery frame holder
with the pins in the frame-mounting plate of the
carriage.
1 Pins in the frame-mounting plate
2 Holes on the embroidery frame holder
7 Secure the embroidery frame holder with the two
thumb screws.
1 Use the thumb screws included with the machine
(thumb screws removed in step
CAUTION
●
Using the disc-shaped screwdriver
included, firmly tighten the thumb
screws.
186
Additional digitizing
information
When creating a pattern for embroidering with a cap
frame, pay attention to following points in order to
avoid registration problems (misalignment of gaps in
the pattern).
1
2
1
on page 171).
Sew underlay stitches.
Start the embroidery pattern from the center,
and sew toward the ends.
With PR-600II, the order in which patterns are
selected when they are combined is the order
in which they will be sewn. For the following
example, select the patterns in the order
→ → →
"E" "A" "B" "R" to make the combined
pattern "BEAR".
Incorrect
sewing
order
Correct
sewing
order
Note
● Do NOT sew from one end to the other,
otherwise wrinkling or shrinking may occur.