Oster BLSTDC6000Z Instruction Manual page 11

I N ST RU CT I ON FOR USE
ASSEMBLING YOUR BLENDER
1
1. Turn jar upside down so the small opening is at the top. Place sealing ring over jar
opening.
2. Place blade into jar.
3. Place threaded bottom disc and turn it clockwise to tighten.
4. Place jar assembly onto base.
OPERATING INSTRUCTIONS
FOR CONTINUOS SPEED
1. Push the Low t speed button (to select speeds 1 through 5) or High s speed
button (to select speeds 6 through 10).
2. For speeds 1 through 8, push the desired speed button and blend ingredients to
desired consistency. When done, push off button "O" to stop the blender and turn it off.
3. For speeds 5 and 10, push the speed button and keep it pressed to blend
ingredients to desired consistency. When done, simply release the button to stop
blender and turn it off.
Do not operate blender continuously for more than 3 minutes.
IMPORTANT:
FOR CONTINUOS SPEED
1. To use PULSE, select the High s or LOW t speed button. Push PULSE
and hold it down for brief length of time. Release PULSE
to stop. Repeat cycle as desired.
Refer to the section "Guide for Processing Foods in Blender" for information on
TIP:
processing foods.
2
E n g li s h - 4
3 4
button
button and allow blade