System Utility>Upgrade Firmware; System Utility>Config Transfer - ADTRAN TOTAL ACCESS 600R User Interface Manual

S U >U
YSTEM TILITY PGRADE
S U >U
YSTEM TILITY PGRADE
Updates firmware when Total Access 600R enhancements are released. Two transfer methods are available for use in
updating the Total Access 600R.
The two methods for upgrading are
Total Access 600R starts a TFTP client function which gets the upgrade code from the TFTP server. Selecting
will load the upgrade code through the
DEM
The factory default is
TFTP.
S U >U
YSTEM TILITY PGRADE
This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is configured) of the
TFTP server. The factory default is no entry in the
S U >U
YSTEM TILITY PGRADE
This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the upgrade code.
The factory default is no entry in the
S U >U
YSTEM TILITY PGRADE
This appears when TFTP is used. It displays the status of the transfer as it happens. Any error or success message will
be displayed here.
S U >U
YSTEM TILITY PGRADE
This activator is used when the configurable items in this menu are complete.
Before using
and default gateway (if required).
S U >U
YSTEM TILITY PGRADE
Use this activator to cancel any TFTP transfer in progress.
S U >C
YSTEM TILITY ONFIG
S U >C
YSTEM TILITY ONFIG
Sends a file containing the Total Access 600R configuration to a PC connected to the
protocol or to a file on a TFTP server using the TFTP protocol.
also lets you save the Total Access 600R configuration as a backup file, so you can use the same
C T
ONFIG RANSFER
configuration with multiple Total Access 600R units. In addition,
from a TFTP server.
64200600L1#T-31A
F
IRMWARE
F >T
IRMWARE RANSFER
and
XMODEM TFTP
port using any PC terminal emulator with xmodem capability.
CRAFT
F >TFTP S
IRMWARE
TFTP S
F >TFTP S
IRMWARE
TFTP S F
ERVER ILENAME
F >T
IRMWARE RANSFER
F >S
IRMWARE TART
, the Total Access 600R should have a valid IP address, subnet mask,
S T
TART RANSFER
F >A
IRMWARE BORT
T
RANSFER
T >T
RANSFER RANSFER
© 2002, ADTRAN, Inc.
Total Access 600R User Interface Guide (UIG)
M
ETHOD
requires a TFTP server running on the network. The
TFTP
.
A
ERVER DDRESS
field
A
ERVER DDRESS .
F
ERVER ILENAME
field.
S
TATUS
T
RANSFER
T
RANSFER
M
ETHOD
C T
ONFIG RANSFER
port using XMODEM
CRAFT
can retrieve a configuration file
Page 29
XMO-