Device Control/Remote Control
Parameters
Descriptions
Disable Remote
If set to "Yes", the Remote control App can be paired to the device via Bluetooth, but
Control App
it cannot connect to the device to perform any operations. The default setting is "No".
Connect
App
The App setting page lists, LDAP Contacts, BroadSoft Directories, Recording Management, And 3rth Party
Application.
App/LDAP Contacts
Parameters
Descriptions
Connection Mode
It is used to select which protocol will be used for LDAP searching, LDAP or LDAPS.
It is used to configure the URI of the LDAP (Lightweight Directory Access Protocol)
Server Address
server.
It is used to configure the LDAP server port.
Port Number
The default LDAP port number is 389.
It is used to configure the LDAP search base. This is the location in the directory where
the search is requested to begin.
Base DN
Example:
dc=grandstream, dc=com
ou=Boston, dc=grandstream, dc=com
Username (Binding
It is used to configure the bind "Username" for querying LDAP servers. Some LDAP
DN)
servers allow anonymous binds in which case the setting can be left blank.
It is used to configure the bind "Password" for querying LDAP servers. The field can
Password
be left blank if the LDAP server allows anonymous binds.
It is used to configure the "name" attributes of each record which are returned in the
LDAP search result. This field allows the users to configure multiple space separated
LDAP Name
name attributes.
Attributes
Example:
gn
cn sn description
It is used to configure the "number" attributes of each record which are returned in the
LDAP search result. This field allows the users to configure multiple space separated
LDAP Number
number attributes.
Attributes
Example:
telephoneNumber telephoneNumber Mobile
GVC3220 Administration Guide
Version 1.0.1.24
P a g e
|
54