Setting The Long Document Mode - Canon imageFORMULA DR-M160 User Manual

8
Place the document with the folded edge facing right and
the top edge facing downward.
After placing the document, align the document guides with both
edges of the document.
IMPORTANT
Adjust the document guides to fit the width of the document.
Otherwise, the image may scan as skewed or shifted.
Hint
• The side of the folded document facing you will become the right
side of the combined image.
• The maximum size for the combined image is A3. When scanning a
folded document of a size other than the standard formats, set
[Page Size] on the scanner driver settings screen to Auto-detection.
(See p. 43)

Setting the Long Document Mode

The length of documents that can be scanned with the scanner is
normally 356 mm (14"), but you can scan documents up to 3,000 mm
(118.1") long by setting the scanner to the Long Document mode.
IMPORTANT
By selecting the Long Document mode and setting the [Paper Size]
on the scanner driver settings screen to Auto-detection, documents
of up to 3,000 mm (118.1") in length can be scanned. Note the
following when using the Long Document mode:
• When scanning in the Long Document mode, if the document is
placed on the scanner in a skewed position, it may hit the edges of
the feeding area and be damaged. Be careful to place the
document so that it is not skewed.
• When scanning with the Long Document mode, paper jam
detection may react slowly, resulting in damage to the document.
Be careful to avoid paper jams.
• When scanning long documents, make sure to set the scanner to
Bypass mode, and scan the documents one at a time.
• When scanning large-sized documents with the Long Document
mode, scanning may be slower. Errors also occur due to memory
shortage, and scanning may be disabled.
1
Start Windows and log in as a user with administrator
privileges.
2
Click the Start button, and then click [All Programs],
[Canon DR-M160], and [Canon imageFORMULA Utility].
imageFORMULA Utility starts.
31