Removing And Attaching The Rollers; Roller Replacement Cycle - Canon imageFORMULA DR-2580C Startup Manual

Removing and Attaching the Rollers

Follow the relevant procedure to remove and attach the roller unit and retard
roller, when you clean them or replace them.
IMPORTANT
Feed rollers are consumable parts. When the rollers start to wear out, paper
jams and misfeeds may occur more often. When this happens, buy a roller
replacement kit, and replace the roller unit and the retard roller.
CAUTION
• Turn ON the power to the scanner to remove or attach the
pickup roller. Be careful when working on the scanner when
the power is ON.
• Do not use excessive force when removing or attaching the
rollers. Doing so may damage them.

Roller Replacement Cycle

When the number of pages scanned exceeds 100,000, a roller replacement
message will appear when the computer is started up. Buy a roller
replacement kit, and replace the roller unit, and the retard roller.
IMPORTANT
• If misfeeds happen often, check the rollers for wear, and replace them if
necessary before the message is displayed.
• Be sure to reset the counter after replacing the rollers. (See "Resetting the
Counter" on p. 67.)
• Contact your local authrized Canon dealer or service representative for
information about the roller replacement kit (roller unit and retard roller).
66
Regular Maintenance