4
Place the documents face up into the feed tray and so they touch the stoppers.
IMPORTANT
There is a load limit mark (
documents higher than this mark (approximately 50 sheets of normal copy
paper of 20 lb bond (80g/m
5
Adjust the Document Guides so they matche the width of the document.
Note
Before starting a scan, make sure that the document is loaded in the scanner
correctly. Scanning a curled document or a creased document can damage the
document.
6
Start scanning from the application.
54
Using the Scanner
Stopper
) on the Document Guides. Do not stack
2
)). Doing so may cause a paper jam.