Canon imageFORMULA DR-2580C Startup Manual page 63

Scanning Folio (Folded Document)
The scanner uses a folio scanning method scan documents that are bigger than
LTR/A4 size paper (maximum 11" x 17"/A3 size paper). To do folio
scanning, fold the document in half and set it on the scanner, both sides of the
folded document are scannded and are combined as a single image.
IMPORTANT
• Attach the Document Guide Adaptor to prevent documents from skewing
when doing folio scan. (See p. 47.)
• Use nonseparated document scanning when doing folio scan.
• Firmly set the fold in the document. The fold in the document may cause
paper jams or misaligned images.
Note
• Folio scanning is set in the ISIS/TWAIN driver.
• The image on the front of the folded document appears as the left side of
the image.
• Combined images can be a maximum 11" x 17"/A3 size.
• A seem may appear in where the images are combined if the document or
the fold in the document is crooked.
Flatbed Scanner Unit (Option)
A flatbed scanner unit is available for the DR-2580C as an option. The flatbed
scanner unit can be used to scan thick documents, books, and other originals
that cannot pass through the feeder, without changing to a different scanner or
application.
Note
The flatbed scanner unit cannot operate in a stand-alone configuration.
Contact your retailer for more detailed information.
(Front) (Back)
(Combined Image)
Using the Scanner
61