Canon SELPHY ES2 Beginner's Manual page 24

Too many marks
Too many images have been marked with print settings. Mark 998 or less images.
•
Cannot trim
You attempted to trim an image smaller than 640 × 480 pixels or an image with a
•
width-to-height ratio narrower than 16:9. Select another image to trim.
Image not compatible
You attempted to put a speech bubble in an image smaller than 320 × 240 pixels or
•
an image with a width-to-height-ratio narrower than 16:9. Select another image size
that allows speech bubbles to be set.
Device Not Supported
This displays when you attempt to connect an unsupported USB device, e.g. USB
•
memory. Disconnect the USB device.
• This displays when you attempt to transfer an image from a mobile phone using
IrSimple. If your mobile phone supports another transfer method, switch to that
method and transfer the image.
Device Not Supported (HUB)
You attempted to connect an unsupported USB connector, e.g. a USB hub.
•
Disconnect the USB hub.