Canon SELPHY CP600 User Manual page 18

Devices
Do not block the air vents on the printer. Blocking the vents may cause the inside of the
printer to overheat, resulting in damage to internal components and risk of equipment failure
or fire. Use the devices in a well-ventilated area.
Do not rest heavy objects on the devices. Objects may fall off the devices and cause
injury. Weight placed on the devices may deform the casing, resulting in damage to internal
parts and posing risk of fire.
Unplug the devices when you are not using them. If the devices remain plugged in, there
is risk that accidental contact with the device's internal parts may cause electric shock.
Leaving the devices plugged in during prolonged periods of non-use poses risk of fire.
Do not remove the paper cassette from the printer while printing is in progress. Paper
moves back and forth in the cassette four times during printing. Placing your hand in the way
of moving paper may result in injury. Wait for printing to finish completely before removing the
cassette. Never place your hand into the paper cassette slot.
Do not reach into internal parts of the devices except as specified in the operating
instructions. Reaching into inappropriate parts of the devices may cause your hand to
become caught or injured.
Power
Do not move the devices while they are plugged in. Doing so may damage the power
cord. Continued use of a damaged power cord poses risk of fire or electric shock.
Do not excessively bend or twist the power cord. Doing so may damage the cord.
Continued use of a damaged cable poses risk of fire or equipment failure. Leave about 15 cm
(6 in.) of clearance at the front and back of the devices and 10 cm (4 in.) of clearance on both
sides to ensure adequate ventilation.
Do not pull on the power cord. Doing so may damage the power cord. Continued use of a
damaged cord poses risk of fire or electric shock. Always hold the cord by the plug area when
unplugging it.
16
CAUTIONS