Table of Contents
Advertisement
Sleep Mode
1
Press the
to set the time when you
want the unit to stop automatically.
2
The timer is programmed in one-hour in-
crements by pressing the
To alter the time period in steps of 1 hour,
press the
while aiming at air condi-
tioner.
3
(In case of non-Inverter Model)
Make sure the sleep mode LED lights up.
To cancel the sleep mode, press the
several times until the sleep mode LED
lights off.
(In case of Inverter Model)
Make sure the Timer LED lights up.
To cancel the sleep mode, press the
several times until the Timer LED lights
off.
!
NOTE
• The sleep mode will operate indoor fan
at slow speed in cooling mode and at
medium speed in heating mode for
pleasant sleep.
• Art Cool and Art Cool Wide (non-Deluxe)
close the lower discharge partially in
sleep mode for pleasant sleep.
In cooling mode or healthy dehumidifica-
tion mode:
The setting temperature will rise automat-
ically two times by 1 °C over next consec-
utive 30 minutes (2 °C in 1 hour) for a
comfortable sleep. Now this will be the
final setting temperature as long as sleep
mode is functioning.
Vertical/horizontal Airflow
Direction Control (Optional)
Tue up/down airflow (Vertical airflow) can be
adjusted by using the remote controller.
1 to 7 times.
1
Press the
2
Press
3
The louvers will swing up & sown auto-
matically.
4
To stop the louver at a desired angle, press
BASIC FUNCTIONS
to start the unit.
.
again.
13
Advertisement
Table of Contents
