Table of Contents
Advertisement
BASIC FUNCTIONS
10
BASIC FUNCTIONS
Operation Mode
1
Press the
to turn the unit on.
The unit will respond with a beep.
2
Open the door of the remote controller and
press the operation mode button. Each
time the button is pressed, the operation
mode is shifted in the direction of the
arrow.
3
For cooling or heating operation set the de-
sires indoor temperature by pressing the
.
For cooling the temperature can be set
within 18 °C ~ 30 °C and for heating the
temperature range is 16 °C ~ 30 °C.
4
Set the fan speed with the remote con-
troller. You can select the fan speed in four
steps-low, medium, high and CHAOS by
pressing the
. Each time the button is
pressed, the fan speed mode is shifted.
Natural wind by the CHAOS logic
For fresher felling, press the
set to CHAOS mode.
In the mode, the wind blows like a natural
breeze by automatically changing fan speed
according to the CHAOS logic.
Healthy Dehumidification
Operation
During Healthy Dehumidification Operation
1
If you select the Dehumidification mode on
the
humidification function. It automatically
sets the room temperature and airflow vol-
ume to the best condition for Dehumidifi-
cation, based on the sensed current room
temperature.
In this case, however, the setting tempera-
ture is not displayed on the remote con-
troller and you are not able to control the
room temperature either.
2
During the healthy Dehumidification func-
tion, the airflow volume is automatically
set according to the optimization algorithm
responding to the current room tempera-
ture status, so that the room condition is
kept healthy and comfortable even in the
very humid season.
To run the healthy Dehumidification mode
follow steps 1, and 2 and 4
selector and
(See operation mode)
, the product starts to run the De-
Advertisement
Table of Contents
