Install The Ink Tanks - Canon PIXMA iP4600 Series Getting Started

4

Install the Ink Tanks

• Do not handle the ink tanks roughly such
as applying them excessive pressure or
dropping them.
• If the Print Head Holder moves to the right,
close and reopen the Top Cover .
• Be sure to use the supplied ink tanks .
1
(1)
(2)
Pull the orange tape (1) in the
direction of the arrow to peel off
the protective film and remove
the film (2) completely.
1 2
2
(A)
While pressing down with your left thumb, twist
off the orange protective cap (A) located on the
bottom of the ink tank .
• Do not hold the sides of the ink tank ; ink may splash.
4
3 5 6
5