Canon PIXMA iP4600 Series Getting Started page 6

3
Install the Print Head
3
Remove the Print Head from
the silver package.
• There may be some transparent or light blue ink on the inside of the bag the Print
Head comes in, or the inside of the protective cap - this has no effect on print
quality. Be careful not to get ink on yourself when handling these items. Be careful
not to stain your hands.
4
4
Remove and discard the orange
protective cap.
1
5
Tilt the Print Head and set it in place. Lower the Print Head Lock Lever
(D) completely.
• Do not knock the Print Head against the sides of the Holder.
• Pinch the Print Head Lock Lever fi rmly and lower it gently.
• Once you have installed the Print Head , do not remove them unnecessarily.
3
2 4 5 6
(D)