Sound Effects; Illumination - Panasonic SC-UA7 Owner's Manual

Memory presetting
You can preset up to 30 FM stations.
█
Automatic presetting
1
Press [AUTO PRESET] to select "LOWEST" or
"CURRENT".
LOWEST Tuning begins from the lowest frequency.
CURRENT Tuning begins at the current frequency.
2
Press [OK] to start presetting.
The tuner presets all the stations it can receive into
the channels in ascending order.
To cancel, press [8].
█
Manual presetting
1
Press [3] or [5] (unit: [2/3] or
[5/6]) to tune in to the station.
2
Press [OK].
3
Press the numeric buttons to select a preset
number.
Re-do steps 1 through 3 to preset more stations.
The new station replaces any station that occupies
the same preset number.
█
Selecting a preset station
Press the numeric buttons, [2] or [6] to select
the preset station.
Using the unit
1
Touch [8] to select "PRESET".
2
Touch [2/3] or [5/6] to select the preset
station.
Improving the sound quality
1
Press [PLAY MENU] to select "FM MODE".
2
Press [Y, U] to select "MONO" and then press
[OK].
To cancel, select "STEREO".
"MONO" is also canceled when you change the
frequency.
To memorize the setting
Continue with step two of "Manual presetting".
Checking the signal status
Press [DISPLAY].
FM – – – – The FM signal is weak.
The system is not tuned in to a station.
FM ST The FM signal is in stereo.
FM MONO "MONO" is selected as the "FM MODE".
The FM signal is in monaural.
FM allocation setting
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
1
Press [RADIO/EXT-IN] to select "FM".
2
Touch and hold [SELECT] on the unit.
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, re-do the above steps.
• Preset frequencies are erased after you change the
setting.

Sound effects

1
Press [EQ] to select the sound effect.
2
Press [Y, U] (unit: [<, >]) to select the setting and
then press [OK].
PRESET EQ Select the desired preset EQ
setting.
Note:
Select "VOICE EX" for voices to be
heard as if they are coming from a
TV. (The unit and the TV must be put
side by side.)
BASS/MID/TREBLE –4 to +4
SURROUND "ON SURROUND" or
"OFF SURROUND"
D.Bass
1
Press [D.BASS] to select "D.BASS LEVEL" or
"D.BASS BEAT".
To cancel, select "OFF D.BASS".
2
Press [Y, U] (unit: [<, >]) to select the setting and
then press [OK].
Note:
D.BASS BEAT: This function emphasizes the attack level of
the drumbeat and produces a punchy sound. Depending on
the track, the effect may be small.

Illumination

You can turn on or turn off the illumination on the system.
Press [ILLUMINATION] to select "ON" and then press
[OK].
To cancel, select "OFF".
11