Height Adjustment Of The Upper Handlebar; Lateral Adjustment Of The Handlebar; Transport Wheel - Stihl MH 610 Instruction Manual

11.2 Height adjustment of the upper
handlebar
The height of the upper handlebar can be
adjusted to five different settings.
Danger of crushing!
There is a danger of pinching when
actuating the release lever (height
adjustment).
Pay attention to moving parts!
● Firmly grasp upper handlebar (1) at
handle (2) with one hand and hold.
● With the other hand, push release lever
(height adjustment) (3) downwards and
hold.
● Move upper handlebar (1) into the
required position.
● Allow release lever (height
adjustment) (3) to engage fully upwards
and ensure that the upper handlebar is
fastened.
0478 404 8800 A - EN
11.3 Lateral adjustment of the
handlebar
The handlebar can be adjusted laterally to
three positions.
● Hold upper handlebar (1) at a handle
with one hand.
● Pull release lever (lateral
adjustment) (2) upwards with the hand.
● Move the handlebar into the required
position.
● Release release lever (lateral
adjustment) (1) again and allow to
engage in one of the three positions.
● Check the handlebar for secure
seating.

11.4 Transport wheel

With the aid of the transport wheel in the
transport position, the tiller can be
transported by pushing or pulling (lifting
slightly).
Risk of injury!
If the transport wheel is in the
working position (folded upwards)
and the pin and spring clip are not
fitted, the transport wheel may fall.
Danger of crushing!
Danger of pinching when changing
the position of the transport wheel.
Pay attention to moving parts!
Transport wheel in transport position:
● Transport wheel (1) is installed as
shown.
● To transport the tiller, hold the machine
firmly at the handles with both hands
and lift.( 13.)
27