Advertisement
6
®
Install the Printer Driver (Windows
)
1
Be sure to TURN THE PRINTER OFF before
continuing.
POWER
POWER
Button
Lamp off
NOTE: For Windows
®
XP, Windows 2000 or
Windows NT 4.0, log on to Windows as an
Administrator before continuing.
IMPORTANT: If you see the Add New
Hardware Wizard, click Cancel.
2
Close any open software applications,
then insert the "S520 Setup Software &
User's Guide" CD-ROM. The setup program
should run automatically.
NOTE: If the setup program does not run,
click Start, then Run, then type D:\msetup.exe,
where D is your CD-ROM drive.
3
Read the Welcome screen, then click Next.
4
Read the License Agreement, then
click Yes.
5
When the main menu appears, click
Install.
NOTE: If you are prompted to restart Windows,
remove the CD-ROM, then click OK. After the
computer restarts, insert the CD-ROM and
continue.
6
TURN THE PRINTER ON so the printer port
(connection) can be automatically detected.
POWER
POWER
Button
Lamp on
The software will begin identifying the
printer port being used.
IMPORTANT: If your computer cannot
detect a printer port, refer to the
Troubleshooting chapter in the "S520
Quick Start Guide" for instructions.
When the Terminate Installation window
7
appears, click OK.
Follow the on-screen instructions to continue
8
with Product Registration.
NOTE: Remember to register your product
to ensure product support. The serial number
is located on the inside of the printer, to the
right of the printhead.
9
When the software screen appears,
click Install.
10
When the Terminate Installation window
appears, click OK, then Exit.
NOTE: For more information. refer to the
"S520 Quick start Guide" or view the Photo
Application Guide on the "Setup Software &
User's Guide" CD-ROM.
11
To insure highest quality output, continue
with Step 7 Align the Printhead.
6
®
Install the Printer Driver (Macintosh
)
1
Insert the "S520 Setup Software & User's
Guide" CD-ROM.
NOTE: Screen shots may differ depending on the
operating system used.
Open the printer driver folder on the
2
CD-ROM, then double-click the Installer icon.
3
Read the License Agreement and click
Accept.
4
Click Install. The printer driver will load
automatically.
5
If the message "No other applications can be
running..." displays, click Continue.
6
When the "Installation was successful"
screen displays, Restart your computer.
NOTE: Register your product to ensure product
support. Open the printer driver folder and
double-click the Product Registration icon, then
follow the on-screen instructions.
The serial number is located on the inside of the
printer, to the right of the printhead.
7
After the computer restarts, TURN THE
PRINTER ON. Select the Apple menu,
then Chooser.
8
Click the S520 icon in the Chooser. The
printer name will highlight and move to
the right panel.
NOTE: To use the BJ Print Monitor, click the
Backgrounding button to the On position.
9
Close the Chooser.
From the Application folder, double-click on
10
the software to be installed.
11
When the "Installation has Finished" screen
appears, click OK.
NOTE: For more information, refer to the
"S520 Quick start Guide" or view the Photo
Application Guide on the "Setup Software &
User's Guide" CD-ROM.
To insure highest quality output, continue
12
with Step 7 Align the Printhead.
7
Align the Printhead
Before using the printer, align the printhead
to ensure the best quality printing.
1
Load a stack of blank paper in the
paper rest.
2
Start the alignment procedure.
Windows:
a. Select Start, then Settings, then
Printers.
NOTE: For Windows XP select Start,
Settings, then Control Panel. Then click
on Printers and Other Hardware, then
Printers and Faxes.
b. Right-click the Canon S520 icon,
then click Properties.
c. Click the Maintenance tab, then
click the Print Head Alignment icon.
d. When asked to start printhead
alignment, click OK.
e. Follow the on-screen instructions
to complete printhead alignment.
Macintosh:
a. From the File menu in a software
application, click Page Setup.
b. Click the Utilities button.
c. Select Test Print from the pull down
menu.
d. Click the Print Head Alignment icon.
e. Follow the on-screen instructions
to complete printhead alignment.
Click OK (Windows) or Close (Macintosh)
3
when finished.
Part no. QA7-1989
© 2001 Canon U.S.A., Inc.
Canon, BJ, BCI and Bubble Jet are trademarks of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
Printed in Thailand
Advertisement
