Front Enclosure - Husqvarna VIKING Designer Jade 20 Service Manual

Covers
E. Front Enclosure
1. Remove the screw (a) located on the top right
side of machine.
a
2. Loosen the screw (b) located on the top left side
of machine.
b
3. Loosen the screw (c) located left side of the
c
machine arm.
4. Remove the screw (d).
5. Pull the hand wheel (e) to the left side to
remove it.
d
e
6. Tilt the machine backward. Insert a fl athead
screwdriver into the bedside of the front
6
Rear Enclosure
enclosure.
Pull upward to come off the hooks (f).
f
E
Rear Enclosure
38 1047356-26