Introduction - Toyota INTEGRATED DASHCAM Owner's Manual

17

INTRODUCTION

The Integrated Dashcam is designed to be installed on your front
windshield. The camera will automatically save and record data
after impact in the event of a crash. The camera automatically
starts when the ignition power is on. When the vehicle is
stationary, you can access videos and change the settings via your
Smartphone App.
The Integrated Dashcam features a number of different recording
modes:
Normal Recording: Loop recording, 2 mins video file duration.
Oldest file deleted once Normal Recording allocation is full.
Event Recording: Triggered by G-sensor or triggered manually
(short press ACTION button for Event Recording). Oldest file
deleted once Event Recording allocation is full. This over-writing
can be turned off in the app, but may result in files not being
protected if memory is full.
Parking Recording: When the vehicle shuts down and then
waits 2m 45s, the Parking mode starts. The parking recording is
triggered by G-sensor and takes 5 seconds to boot up and record
1 minute of footage per G-shock event. Oldest file deleted once
Parking Recording allocation is full. This over-writing can be
turned off in the app, but may result in files not being captured if
memory is full.
Adventure Recording: Activated by long pressing Action button,
records continuous file till card full or user stops recording by
pressing Action button again with a long press.
For any questions about your Toyota Integrated Dashcam, please
consult your Toyota dealer.
Thank you for purchasing a Genuine Toyota Accessory.