Introduction To Bsm And Rcta - Toyota BSM Owner's Manual

2.0

Introduction to BSM and RCTA

a. The Blind Spot Monitor (BSM) is a driver aid that assists the driver to
make safer decisions when changing lanes.
b. The Rear Cross Traffic Alert (RCTA) is a driver aid that assists the
driver to make safer decisions when reversing the vehicle.
c. The BSM and RCTA uses the same radar sensors installed in the rear
bumper to detect other vehicles approaching user's vehicle at adjacent
lanes.
d. There are LED indicator icons located at the left hand and right hand
side mirrors of the vehicle (see following picture).
e. The LED indicator icons functions to notify driver of an incoming vehicle
or object within the range of detection.
f. When vehicle engine is started, the LED indicator icons on side mirrors
will light up for 2 seconds and a beep alert sound.
NOTE: Image is for illustration purpose only. Actual
product may vary based on respective model.
> Please ensure vehicle rear bumper is always kept clean
in order for the sensors to work best.
> LED indicator icons may be difficult to be seen under
bright sunlight. Pay full attention on road while driving.
Please read this manual for proper operation and keep it for future reference.
SECTION 2.0
Introduction to BSM and RCTA
!
WARNING
SECTION 3.0
INNOVA - JAN - 2021 - 001
2/7