Install The Printer Driver - Canon BJC-3000 Series Quick Start Manual

7

Install the Printer Driver

The printer driver controls communication between the printer and your computer. Use the Canon Creative CD-ROM
and follow these simple steps and the instructions on the screen.
Windows 98—USB Cable Users
1. Turn on the computer. The Add New
Hardware screen appears:
2. Insert the Canon Creative CD-ROM into your
CD-ROM drive and click Next. The next
screen asks what you want Windows to do:
3. Choose "Search for the best driver for your
device," and click Next. The next screen
asks you where to look for the driver:
4. As shown above, click the "CD-ROM drive"
check box; be sure to uncheck the other
options. Click Next.
5. Once the driver is found, this screen appears:
6. Click Next. The next screen shows the successful
completion of this installation. USB is now enabled
on your computer.
7. To proceed on to the printer driver installation,
click Next.
8. Eject the CD-ROM and re-insert it. Setup starts
automatically.
If Setup does not start automatically,
click Start on the Windows taskbar
and then click Run.
Type X: \SETUP (where X:is your
CD-ROM drive). Then click OK.
9. Follow the on-screen instructions.
Setup includes:
Printer driver installation
Product registration (see What's Next—Product
Registration)
Creative software installation
Installation Tips
If you do not see one of these screens, eject the CD-ROM
and re-insert it. Then follow the instructions on the screen.