Canon PIXMA MP510 Setup Instructions page 2

Windows MP Drivers Installation
®
Note
• The screens below refer to Windows XP Service Pack 2 installation.
Screens may vary depending on the operating system you are using.
• For Windows XP or Windows 2000, log on to Windows as a member of the
Administrators group before continuing.
• Before installing the driver, disable all anti-virus programs and automatically
loading programs.
a Turn off the machine.
(1) Press the ON/OFF button.
(2) Make sure that the POWER lamp stops flashing.
b Turn the computer on and start Windows.
Important
If you see the Found New Hardware Wizard, remove the USB cable. Click
Cancel to quit the screen. Next, turn off the machine. Then proceed from step
3 to install the MP Drivers.
Insert the Setup CD-ROM. The setup program should run
c
automatically.
Note
The setup program should run automatically. If the installer in the CD-ROM does
not run automatically, click Start and select My Computer, then double-click the
CD-ROM icon .
When the main menu appears, click Easy Install.
d
Note
• Select Easy Install in order to install the MP Drivers, on-screen manuals, and
application software. Select Custom Install in order to choose the options you
would like to install.
• To install Adobe RGB (1998), click Custom Install and follow the on-screen
®
instructions. If you are using Windows Me/98, Adobe RGB cannot be installed.
e When the list of applications to install appears, confirm the
contents, click Install.
Note
Move the cursor over items to display explanations of each application below.
Part no. QT5-0453-V02 © 2006 Canon Inc. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. "Adobe" and "Adobe RGB (1998)" are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other product and brand names are trademarks
of their respective owners. Specifications subject to change without notice.
Read the License Agreement carefully and click Yes.
f
Follow the on-screen instructions to install the software.
If a message asking for your confirmation to restart your
computer appears, click OK.
g When the Printer Connection screen appears, connect the
machine with a USB cable, then turn the machine on. The
software will begin identifying the printer port being used.
Important
If you cannot go to the next procedure after 3 minutes, refer to "Trouble-
shooting" instructions in the User's Guide on-screen manual.
h Follow the on-screen instructions to register your product.
Note
When the User Registration screen appears, follow on-screen instructions to
register your product. You will need your product serial number, which is located on
the inside of the machine. See Step 1- on the front page.
f
i When the Installation completed successfully screen
appears, click Exit.
If Restart is displayed, make sure that the Restart the system now
(recommended) check box is selected, then click Restart.
Now you have completed installation of the
software.
Macintosh MP Drivers Installation
®
Important
Since Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or
®
earlier are not supported, do not connect the machine to these.
Note
• Use Mac OS X v.10.2.8 to 10.4.x.
• The screens below refer to Mac OS X v.10.4.x installation. Screens may vary
depending on the operating system you are using.
• Log on as an Administrator before continuing.
• Before installing the driver, disable all anti-virus programs and automatically
loading programs.
a Connect one end of the USB cable to the computer, the
other to the machine.
Note
Make sure the machine is turned on.
Turn on your Mac.
b
c Insert the Setup CD-ROM.
Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
on the desktop.
Double-click the Setup icon.
d
e When the Authenticate screen appears, enter your
administrator name and password. Click OK.
If you do not know your administrator name or password,
click , then follow the on-screen instructions.
When the main menu appears, click Easy Install.
f
Note
Select Easy Install in order to install the MP Drivers, on-screen manuals, and
application software. Select Custom Install in order to choose the options you
would like to install.
g When the list of applications to install appears, confirm the
contents, then click Install.
Note
Move the cursor over items to display explanations of each application below.
Read the License Agreement carefully and click Yes.
h
Follow the on-screen instructions to install the software.
i Follow the on-screen instructions to register your product.
Note
When the User Registration screen appears, follow on-screen instructions to
register your product. You will need your product serial number, which is located
on the inside of the machine. See Step 1- f on the front page.
When the Installation completed successfully screen
j
appears, click Restart.
The system is restarted automatically.
*When connecting from Mac OS X v.10.3.3 or earlier:
Restarting the computer while connected to the machine may cause the
machine not to be detected. To resolve this, either unplug the USB cable
then plug it back in again, or turn the machine off then back on again.
k After restarting the computer, start Printer Setup Utility
(start Print Center if you are using Mac OS X v.10.2.8) and
then check that the printer name you want to use is shown
in Printer List. If the printer name is not displayed, click
Add to add the device.
For more detailed instructions, refer to the Mac on-screen
Help.
Now you have completed installation of the
software.
Printed in Vietnam.