Canon MultiPASS L6000 Quick Start Manual page 9

3
Connect a
Make sure the computer is turned off.
bi-directional
parallel cable to
You can purchase a Centronics-compatible, parallel cable with bi-directional
the MultiPASS.
capability from your dealer or from any computer store. Make sure the cable is
IEEE 1284-compliant.
A cable of 6.6 feet or less in length is recommended.
Align the cable connector with the interface port so the shapes match.
Gently press the cable connector into the port.
Secure the cable connector by snapping the two wire clips (located on the sides
of the port) into the cable connector.
Connect the other end of the cable to the parallel interface port
on your computer.
8