Setting The Auto Rotate Function - Canon Powershot SD890 IS DIGITAL ELPH User Manual

Setting the Auto Rotate Function

Your camera is equipped with an Intelligent Orientation sensor that
detects the orientation of an image shot with the camera held
vertically and automatically rotates it to the correct orientation when
viewing it in the LCD monitor.
1
Select [Auto Rotate].
1. Press the
2. Use the
menu.
3. Use the
[Auto Rotate].
2
Make settings.
1. Use the
or [Off].
2. Press the
• When the Auto Rotate function is set
to [On] and the LCD monitor is set to
the detailed display mode in the shooting mode,
(right end is down) or
display.
This function may not operate correctly when the camera is
pointed straight up or down. Check that the arrow
pointing in the right direction and if it is not, then set the Auto
Rotate function to [Off].
Even if the Auto Rotate function is set to [On], the orientation
of images downloaded to a computer will depend upon the
software used to download the images.
button.
or button to select the
or button to select
or button to select [On]
button.
(left end is down) will appear in the
183
(normal),
is