Canon Powershot SD890 IS DIGITAL ELPH User Manual page 114

112
2
Press the
• The camera will switch to color input
mode, and the display will alternate
between the original image and the
color swap image (using the
previously set color).
3
Aim the camera so that the original color
appears at the center of the LCD monitor and
press the
• Only one color can be specified.
• You can use the
the range of colors that are changed.
5 : Only takes the color that you want to swap.
–
+5 : Also takes colors close to the one that you want to swap.
4
Aim the camera so that the desired color
appears at the center of the LCD monitor and
press the
• Only one color can be specified.
5
Press the
then shoot.
The default setting for Color Swap changes green into white.
You may not obtain the expected results if you use the flash.
The colors specified in the Color Swap mode are retained
even if the camera's power is turned off.
button.
button.
or button or the control dial to specify
button.
button to complete the setting,