Door Handle Reversal - Kenmore K Series Use & Care Manual

Door Handle Reversal

1 Use the supplied hex key to loosen the
set screws in the top and bottom handle
ends.
2 Raise handle up and remove from door.
냉동고_K@FU015AWD(EN+ES).indd 15
3 Unscrew and remove the handle
attachment bolts from the door. Remove
the bolt hole plugs on the other side of
the door. Insert and tighten the bolts into
the holes. Insert the plugs into the holes
exposed by removal of bolts.
4 Place the holes in the handle ends over
the handle attachment bolts and slide
handle down. Using the supplied hex
wrench, tighten the set screws in the
handle ends to secure the handle to the
bolts.
15
2021-03-29 오전 11:05:36