Shutdown And Care For The Pump - Graco Dura-Flo 1200 Instructions Manual

Operation
circulating system, the pump will speed up or slow
down on demand, until the air supply is shut off.
10. Use the air regulator (F) to control pump speed and
fluid pressure.
Always use the lowest air pressure necessary to get
the desired results. Higher pressures cause
premature tip and pump wear.
Shutdown and Care for the
Pump
10
NOTICE
1. Follow the Pressure Relief Procedure, page 8.
2. Follow Flush the Equipment, page 8.
Always flush the pump before the fluid dries on the
displacement rod and causes damage.
For overnight shutdown, stop the pump at the bottom
of its stroke to prevent fluid from drying on the
exposed displacement rod and damaging the throat
packings.
NOTICE
NOTICE
308360D