Canon Powershot A50 Software Starter Manual page 21

9. Confirm or select the correct camera model and
communication settings (communications port and
baud rate).
• Confirm that [PowerShot A50] is showing in the Camera
Model list box. If it is not, click the list box arrow and
select it.
• Click the [Communication Settings] button to display the
Communication Settings dialog. Select the COM port to
which the interface cable is connected. If you are not sure,
click the [Detect] button. Select the [115.2K] baud rate
(transmission speed) for normal circumstances. Select the
[115.2K] baud rate unless you have trouble establishing a
connection. If you have trouble, try progressively slower speeds.
10. Click the [Camera] button.
• If you are loading images from a CF card in a PC card slot, select the [My Computer]
button instead (p. 9).
• The Communication Settings dialog may appear the first time you use PhotoImpact.
Confirm that the settings are set according to the instructions in Step 9.
• If images have been recorded in both the "Design rule for Camera File system format"
and the CIFF format on the same CF card, the Select Folder dialog may also appear. To
load "Design rule for Camera File system format" images, select the DCIM folder. To load
CIFF images, select the DC97 folder.
11. Select the images for loading and click the
[Acquire] button.
• To select all the images in the folder, click the
[Select All] button.
12. Click the [Exit] button to return to the
PhotoImpact window.
The acquired images will appear in the
PhotoImpact window.
13. Use PhotoImpact to retouch or apply special effects to the images and save
them to the hard disk.
Refer to the help file and the on-screen guide, Ulead PhotoImpact User Guide for further
instructions (pp. 20-21).
19