Loading Images With Timetunnel - Canon Powershot A50 Software Starter Manual

Loading Images with TimeTunnel

TimeTunnel is an image browsing program. Registered images are displayed in tunnel files
in chronological order using the shooting date and time. You can view your images as if
they were scrolling past you in a time tunnel.
1. Attach the camera to the computer (p. 9).
2. Turn the camera's Mode Dial to the [PC]
position.
3. Start TimeTunnel.
Click the Windows [Start] menu and select [Programs],
[PowerShot Utilities TimeTunnel] and [TimeTunnel 2.4].
4. A dialog will ask if you wish to view the Using TimeTunnel guide.
Click the [Yes] button to view it or the [No] button to proceed directly to the program.
5. Confirm or select the correct camera model and communication settings
(communications port and baud rate).
• To select the camera model, click the [File] menu and select [Connection Settings] and
[Select Camera Model]. Confirm that [PowerShot A50] is highlighted in the list box. If not,
select it.
• To select the communication settings, click the [File] menu and select [Connection
Settings] and [Communication Settings] to display the Communication Settings dialog.
Select the COM port to which the interface cable is connected. If you are not sure, click
the [Detect] button. Select the [115.2K] baud rate (transmission speed) unless you have
trouble establishing a connection. If you have trouble, try progressively slower speeds.
6. Click the [Connect to Camera] button.
The Camera Model and Communication Settings dialogs may
automatically appear the first time you use TimeTunnel. In this
case, confirm the settings as explained in Step 5.
12