Britax BOB Gear ICSA User Manual page 9

4. Attach Receiver To Stroller.
Slide receiver into the fabric
opening, aligning with the
yellow locking pins� Push
down on the receiver to
engage with the locking pins
and securely attach to the
stroller� Repeat steps on
opposite side to install the
second receiver�
NOTE: The removable
receivers are securely attached
when you hear a "click" and
see a green bar revealed
within the yellow button of the
receiver. If the green bar is not
visible and you do not hear
a click, slide receiver up and
down or reinstall to ensure a
secure attachment.
5. Verify Proper Installation.
Ensure green bars are visible
and pull on each receiver to
verify secure attachment�
Your stroller is now converted
so that it can receive an infant
car seat adapter (ICSA)�
CHICCO ICSA User Guide
Green Bar
7