Britax BOB Gear ICSA User Manual page 8

BOB Gear
®
ATTACHING REMOVABLE RECEIVERS TO STROLLER WITHOUT
BUILT-IN RECEIVERS
1. Preparing Stroller.
(A) Set parking brake�
(B) Rotate canopy towards
handlebar�
NOTE: See stroller user guide
for more information.
2. Identify Left And Right Receivers.
Identify the "R" for right and "L"
for left embossed on the inside
of the receivers� Receivers will
need to be installed on the
child's respective side (e�g� the
"R" receiver on the child's right
when sitting in the seat)� For an
additional check, identify the
"BOB Gear
on the receivers� The logo
will always be facing to the
outside of the stroller when
installed correctly�
3. Locate Yellow Locking Pins�
Identify the fabric opening
within the seating area
alongside the frame�
Pull fabric away from the
frame to reveal two yellow
locking pins�
6
Logo" embossed
®
Right Inside Facing.
Left Outside Facing.
Zoom-In View Of
Locking Pins