Attaching Icsa To Stroller - Britax BOB Gear ICSA User Manual

BOB Gear
®

ATTACHING ICSA TO STROLLER

NOTE: When the stroller has built-in receivers, do not use the removable
receivers included with the ICSA system. Please set them aside.
1. Prepare Stroller.
(A) Set parking brake�
(B) Rotate canopy towards
handlebar�
See stroller user guide
NOTE:
for more information.
2. Install ICSA�
Push ICSA locking end
caps straight into receiver
sockets fully�
NOTE: Listen for click or
snap noise on each side.
3. Verify Proper Installation.
Pull on center of ICSA
front tube to verify ICSA is
securely locked into place�
8