Connecting To A Usb Port - Canon Digital IXUS 300 User Manual

• Operating the camera simultaneously with other USB devices,
excluding USB mice and keyboards, may not work correctly. If this
occurs, disconnect the other devices and then reconnect the
camera.
• Do not have more than two cameras connected to a computer
with the USB interface at any time. The cameras may not operate
correctly.
• Do not put the computer into standby (sleep) mode when a
camera is connected via a USB port. If the computer should go
into standby mode while a camera is connected to a USB port,
leave the camera connected (never disconnect it) and try to take
the computer out of standby mode. Some computers may not
recover properly from the standby mode if the cable is discon-
nected. Please refer to the computer's manual for information
regarding the standby mode.

Connecting to a USB Port

Connect the supplied USB interface cable to the computer's
USB port and the camera's Digital terminal.
• You do not need to turn the camera or computer power off to
connect or disconnect USB interface cables.
• Please refer to your computer's manual for information
regarding the location of the USB ports.
Downloading Images to a Computer
DIGITAL Terminal
USB Port
USB Cable
USB Cable
1. Slip a fingernail
under the upper
edge of the terminal
cover to open it.
2. Insert the connector
until it clicks.
83