Charging The Battery Pack - Canon Digital IXUS 300 User Manual

14 Preparing the Camera

Charging the Battery Pack

Recharge the battery pack with battery charger CB-2LS or CB-2LSE
the first time you use the camera or when the "Change the battery
pack" message is displayed.
Battery charger model names and types vary by region.
CB-2LS
• Insert the battery pack all the way into the battery charger and
plug the charger into an electrical outlet.
• The charging indicator will glow orange while the battery pack
is charging. It will change to a steady green when the charge is
complete.
• After charging, unplug the battery charger and remove the
battery pack from it.
• Since this is a lithium ion battery pack, you need not completely use
or discharge it before recharging.
• It takes approximately 130 minutes to fully charge the battery pack
from a fully discharged state (based on standard Canon testing
conditions). Please charge it at an ambient temperate ranging
between 5 and 40 ºC (41 and 104 ºF).
• Charge times may vary according to the ambient temperature and
the charge state of the battery pack.
• To protect and prolong the life of the battery pack, do not
charge it for longer than 24 hours at a time.
Charging Indicator
CB-2LSE
Charging Indicator