Canon EOS 10D Software Instructions page 149

Camera Settings dialog box
Applies the specified settings,
closes the [Camera Settings] dialog
box and ends the procedure.
The battery level of the
camera battery is indicated by
[OK] or [LOW]. When the
camera is connected to a
household power source using
the DC Coupler Kit (optional),
[AC] is displayed.
Formatting (initializing) a CF card erases all the data on the card. Because formatting
also erases protected images, you should check the data recorded on the card
carefully before proceeding.
Basic Settings tab sheet
Cancels all the settings, restores
the parameters to their original
values and ends the procedure.
Specifying the Camera Settings
This box shows the Camera's
model name, Body ID and
Firmware Version.
These fields set the camera
owner and the date and time.
You can enter up to 31
characters in [Owner's Name].
This box shows whether a CF
card is loaded in the camera
along with the available space
on the card and its total
capacity. You can also format
a CF card from this box.
Applies the settings.
M
3
M-43